Vape Tanks

Vape tanks fuel your flavour, contribute to cloud production and house your all-important e-liquid. If you’re on the hunt for a high-performing tank which doesn’t break the bank, then have a browse through our carefully-curated selection of the best vape tanks from trustworthy brands like Aspire, Innokin, HellVape, Smok and VooPoo to compliment your vaping setup perfectly.

 

Vape Tanks

12 of 144 results

Page
per page
Set Descending Direction
  1. XROS Replacement Pods 2ml 2 Pack

    Vaporesso XROS Replacement Pods 2ml 2 Pack

    Replaceable Pod for the Vaporesso XROS Mini & XROS 2 pod kit x 2

    2 Pack
    £5.99
    Close

    Replaceable Pod for the Vaporesso XROS Mini, XROS 2 pod kit x 2

  2. Nord 50W Replacement Pod 2ml - 3 Pack

    Smok Nord 50W Replacement Pod 2ml ‑ 3 Pack

    Replacement Smok LP2, Nord or RPM 2ml pod for the Nord 50W Pod Kit x 3

    Pack x 3
    £0.00
    Close

    Replacement Smok LP2, Nord or RPM 2ml pod for the Nord 50W Pod Kit x 3

  3. RPM 4 Replacement Pods 3 Pack

    Smok RPM 4 Replacement Pods 3 Pack

    RPM 4 Replacement 2ml Pod x 3

    Pack x 3
    £6.99
    Close

    RPM 4 Replacement 2ml Pod x 3

  4. G-Priv Replacement Pods - 3 Pack

    Smok G‑Priv Replacement Pods ‑ 3 Pack

    Replacement G-Priv Pods 2ml x 3

    Pack x 3
    £0.00
    Close

    Replacement G-Priv Pods 2ml x 3

  5. Xlim Replacement Pod - 3 Pack

    Oxva Xlim Replacement Pod ‑ 3 Pack

    Replacement 2ml Pod for the Oxva XLIM Pod Kit x 3

    Pack x 3
    £9.99
    Close

    Replacement 2ml Pod for the Oxva XLIM Pod Kit x 3

  6. Caliburn A2 Replacement pods 0.9ohm - 4 Pack

    Uwell Caliburn A2 Replacement pods 0.9ohm ‑ 4 Pack

    Replacement pods for the Caliburn A2 pod kit 0.9ohm

    Pack x 4
    £10.99
    Close

    Replacement pods for the Caliburn A2 pod kit 0.9ohm

  7. Zeus Nano 2 Tank 2ml

    Geekvape Zeus Nano 2 Tank 2ml

    Sub-ohm Vape tank 2ml with adjustable airflow compatibility with GeekVape’s B series Coil

    £16.99
    Close

    The new-improved version of the GeekVape Zeus Nano Tank, the Geekvape Z (Zeus) nano 2 tank 2ml features top filling design and adjustable top airflow and compatibility with GeekVape’s B series Coils

    Available Colours
  8. Thiner Replacement 0.8ohm Pod - 2 Pack

    Smok Thiner Replacement 0.8ohm Pod ‑ 2 Pack

    Replacement, refillable Pod 2ml for Smok Thiner Pod Kit, 0.8-ohm built-in mesh coil

    Pack x 2
    £6.99
    Close

    Replacement, refillable Pod 2ml for Smok Thiner Pod Kit, 0.8-ohm built-in mesh coil

  9. TFV18 Mini Tank 2ml

    Smok TFV18 Mini Tank 2ml

    Sub-ohm Vape Tank from Smok

    £27.99
    Close

    A compact and stylish sub-ohm vape tank compatible with Smok’s TFV18 Mini Coils

    Available Colours
  10. Dot Pro Super Berry Sherbet Replacement Pods 2 Pack

    Double Drip E-Liquid Dot Pro Super Berry Sherbet Replacement Pods 2 Pack

    Super Berry Sherbet flavour Double Drip e-liquid in Dot Pro Pod 2ml

    2 x Pack
    £6.49
    Close

    Disposable Dot Pro Pod 2ml pre-filled with Double Drip’s deliciously refreshing Menthol and Peppermint flavour, Menthol Mist

    Select options:
  11. Dot Pro Menthol Mist Replacement Pods 2 Pack

    Double Drip E-Liquid Dot Pro Menthol Mist Replacement Pods 2 Pack

    Menthol Mist flavour Double Drip e-liquid in Dot Pro Pod 2ml

    2 x Pack
    £6.49
    Close

    Disposable Dot Pro Pod 2ml pre-filled with Double Drip’s deliciously refreshing Menthol and Peppermint flavour, Menthol Mist

    Select options:
  12. Dot Pro Original Tobacco Replacement Pods 2 Pack

    Double Drip E-Liquid Dot Pro Original Tobacco Replacement Pods 2 Pack

    Original Tobacco flavour Double Drip e-liquid in Dot Pro Pod 2ml

    2 x Pack
    £6.49
    Close

    Disposable Dot Pro Pod 2ml pre-filled with Double Drip’s rich, smooth and satisfying Original Tobacco flavour e-liquid

    Select options:

12 of 144 results

Page
per page
Set Descending Direction

What is a Vape Tank? 

E cigarette vape tanks have evolved a lot over the years, but their main job remains the same. Quite simply, vape tanks contain your e-liquid and your coil, and many vape tanks feature some form of adjustable airflow that lets you adjust the intensity of your vape. They feature a mouth-piece, or ‘drip tip’, that helps cool the vapour as it enters your mouth, and these are often detachable and replaceable.  

Most vape tanks are attached to the e-cig kit or mod with an 810-connector, a little threaded screw that attaches the tank to the device, but its universal standard means you can often pair your favourite tank with any compatible device.  

What kinds of Vape Tanks are available? 

The three most common types of vape tanks are: Standard, RDAs and RTAs. 

Standard, or regular tanks are the most typical, user-friendly tanks available and can accommodate compatible coils that either push to fit or screw into place.  

RDAs (rebuildable dripping atomisers) are intended for more experienced vapers who enjoy building their own coils out of wire, mesh and cotton. Rather than a tank that contains e-liquid, you ‘drip’ your e-liquid directly onto the cotton threaded through your coil. The flavour and clouds produced by RDAs often exceeds that of regular tanks, but as mentioned, require a lot of manual attention and understanding of resistances and coil building.  

RTAs (rebuildable tank atomisers) are similar to RDAs in the sense that you insert your own coil you’ve built yourself, but RTAs include a tank to house your e-liquid, avoiding the need to constantly soak your wick manually.  

How does a Vape Tank work? 

Before you attach your tank to your vape device, you need to ensure it is first fitted with a compatible coil. Coils used to go by the name of ‘Atomisers’, although you’ll most often hear them referred to as coils these days. These coils are most commonly recommended for the device by the same manufacturer, so for example, a Smok Coil for a Smok Tank. Use our handy Coil Finder to choose the right coils for your tank.  

Once you’ve inserted your coil, and ensured your tank is properly sealed, it’s time to fill up with your preferred e-liquid. Most UK vape tanks adhere to EU rules, which stipulate a maximum capacity of 2ml under TPD (Tobacco Products Directive) legislation.  

We recommend that once you’ve filled your tank with e-liquid, you leave it for at least ten minutes to properly saturate the wicking material (such as cotton). This helps ensure you don’t get any burnt taste from your e-liquid, or ‘spitback’ from where the cotton hasn’t been fully saturated.  

Once the tank has sat, it’s time to vape. Make sure you adjust your vape kit’s wattage to suit the coil you’re using and fire away! You may want to adjust your tank’s airflow after the first few vapes to ‘dial in’ to your preferred vape intensity; something between an airy DL-style (Direct to Lung) or tighter, more restricted MTL-style (mouth-to-lung) experience.  

 

What is the difference between MTL tanks and DL (Sub Ohm) Tanks? 

There are two main categories that vaping styles – and by extension vape tanks – fall into.  

MTL stands for ‘Mouth-to-Lung’ and refers to a style of vaping where you hold the vapour in your mouth before breathing into your lungs. This action mimics the sensation of smoking a traditional cigarette, which is why you’ll find many starter kits and low-powered beginner pod kits and tanks designed especially for this style of vaping, alongside several kinds of e-liquids including high-PGnic salt and 50/50. 

DL stands for Direct Lung, and refers to a style of vaping where you draw the vapour directly into your lungs. This style is most associated with high-powered ‘sub-ohm’ mods and their compatible tanks, as well as high-VG e-liquids which produce more vapour but where the vapour is cooler and easier to take directly into the lungs.  

Which tank you choose depends on your preferred vaping style and the type of vape kit you attach your tank to.