How to replace vape coil?

To replace a vape coil, first ensure your device is turned off and cooled down. Unscrew the old coil from your tank (turn anticlockwise), dispose of it responsibly, then screw in the new coil hand-tight. Prime the new coil with e-liquid, refill your tank, wait 5-10 minutes, then start vaping at low wattage.

How long does a coil last in a vape?

A coil in a vape usually lasts around 5-10 days with typical use. Factors like e-liquid sweetness, vaping habits, and device settings affect lifespan. You'll know it's time to replace when you experience burnt taste, gurgling, reduced vapour production, or flavours that seem muted compared to when the coil was fresh.

Ohm is the unit that measures electrical resistance in vape coils. Lower ohm values (like 0.2ohm) mean less resistance, allowing more power through for warmer vapour and bigger clouds. Higher ohm values (like 1.2ohm) mean more resistance, resulting in cooler vapour and tighter draws suitable for mouth-to-lung vaping.

What is coil priming and why is it important?

Priming involves saturating the cotton inside a new coil before vaping. This prevents dry hits and helps extend coil lifespan.

Coils

Vape Coil

Best Vape Coils for Flavour: Top Picks for 2025

September 01, 2025

The difference between a mediocre vape and an exceptional one often comes down to coil choice. Modern coil technology offers significant improvements in heat distribution, vapour consistency, and flavour clarity, making it easier than ever to find coils that suit your preferences.

Flavour quality is one of the most important aspects of vaping, yet it's also one of the most misunderstood. While personal taste varies, the technical factors that drive better flavour delivery are entirely measurable.

Modern vape coil technology has transformed significantly in recent years. Innovations like mesh construction and improved wicking materials offer genuine performance advantages over older designs. Whether you're using replaceable coils or prefer pre-built pods, success comes down to one thing: matching the right specifications to your setup and e-liquid preferences.

Key Takeaways

Mesh coils generally provide more consistent flavour than standard wire coils due to larger surface area and even heating
Coil resistance must match your vaping style: higher resistance (0.8-1.4ohm) for MTL, lower resistance (<0.5ohm) for DTL
Replaceable coils offer more flexibility and cost-effectiveness, while pre-built pods provide convenience
Proper priming and staying within recommended wattage ranges are crucial for optimal flavour performance
Different e-liquid types require compatible coil designs for best results

Shop Vape Coils

5 x Coils Per Pack

VooPoo PnP X Replacement Coils - 5 Pack

DTL/RDL/MTL

VooPoo PnP X Replacement Coils - 5 Pack

Voopoo PnP X Coils, a breakthrough in coil technology, offer a range of resistances for diverse vaping experiences, from MTL...

£9.49

5 x Coils Per Pack

SMOK RPM 3 Coils - Pack x 5

DTL

SMOK RPM 3 Coils - Pack x 5

Replacement Coils for the SMOK RPM 5 Pod Kit x 5

£9.99

5 x Coils Per Pack

Aspire Nautilus BVC Replacement Coils

MTL

Aspire Nautilus BVC Replacement Coils

Pack of 5 Nautilus BVC Replacement coils.

£6.99

5 x Coils Per Pack

Vaporesso GTX Replacement Coils

DTL/RDL/MTL

Vaporesso GTX Replacement Coils

5 x pack replacement coils

£7.49

5 x Coils Per Pack

Innokin Zenith Coils 5 x Pack

MTL/RDL

Innokin Zenith Coils 5 x Pack

Replacement coils for the Zenith or Zlide Tank

£5.99

5 x Coils Per Pack

Vaporesso GTI Mesh Coils - 5 Pack

DTL

Vaporesso GTI Mesh Coils - 5 Pack

Replacement Vaporesso GTI Mesh Coils x 5

£9.49

5 x Coils Per Pack

Aspire Flexus AF Mesh Coils x 5

DTL/RDL/MTL

Aspire Flexus AF Mesh Coils x 5

Aspire AF Mesh Replacement Coil x 5

£6.99

Do Mesh Coils Really Taste Better?

Absolutely. The most significant advancement in flavour-focused vape coil design is mesh construction. Traditional round wire coils heat from a single point. Mesh coils? Completely different approach.

They use a fine metal strip, often with a honeycomb-like structure. This provides substantially more surface area in contact with the e-liquid. More contact means more even heating and faster ramp-up times. The result: more consistent vapour production and clearer flavour definition.

What Are the Technical Advantages?

Mesh technology addresses several key limitations of standard wire coils:

Faster Heat-Up: The larger surface area heats more quickly and evenly

No Hot Spots: Better heat distribution prevents uneven vapourisation that can distort flavours

Extended Lifespan: More even heating typically extends coil life compared to standard wire

Better Wicking: The mesh structure allows for improved e-liquid flow and saturation

Getting the Wicking Right

Effective wicking ensures the coil maintains proper e-liquid saturation throughout each puff. Modern coils use high-quality cotton wicking that draws e-liquid efficiently while preventing dry hits. The sweet spot? Adequate saturation without restricting airflow around the coil. Get this balance wrong and flavour clarity suffers.

How Do I Match Coil Resistance to My Vaping Style?

Coil resistance determines power draw and heating characteristics. For flavour-focused vaping, this matters more than you might think:

MTL vaping (0.8-1.4ohm): Higher resistance coils operating at lower wattages (10-15W) provide cooler vapour that preserves delicate flavour notes. Our classic MTL coils are designed specifically for this style.
DTL vaping (<0.5ohm): Lower resistance coils at higher wattages (40-100W+) create warmer vapour with more intense flavour delivery. Browse our sub-ohm coils for these setups.
RDL vaping (0.4-0.6ohm): Mid-range resistance offers balanced performance. Works well with various e-liquid types.

Should I Choose Replaceable Coils or Pre-Built Pods?

This comes down to your chosen type of vape kit, vaping lifestyle and priorities.

Replaceable Coils: Complete Control

Replaceable coils work with refillable tanks and pods. You change the coil, keep the tank. Simple.

Choose replaceable vape coils if you:

Vape regularly and want cost efficiency
Enjoy experimenting with different resistance options
Prefer customising your setup for specific e-liquids
Don't mind spending a few minutes on coil changes

Cost efficiency tops the list. You're only replacing the heating element, not the entire pod structure. For regular vapers, this adds up to significant savings.

Pre-Built Pods: Maximum Convenience

Pre-built pod systems integrate the coil directly into the pod structure. When the coil reaches the end of its life. These replacement pods come in MTL, RDL, and DTL variants.

Choose pre-built pods if you:

Value convenience above all else
Want guaranteed freshness with each replacement
Prefer minimal maintenance and setup
Don't mind paying slightly more for simplicity

The convenience factor is huge. No coil installation. No priming complexity. Simply swap pods when performance drops.

Read More: What are Fixed-Coil Pods?

Prefilled Pod Systems: Ultimate Simplicity

Prefilled pod kits take convenience even further. These systems come with pods that are already filled with e-liquid and feature built-in coils. When the e-liquid runs out, you dispose of the entire pod and replace it with a fresh one. Many prefilled pod kits include clever additions such as the capacity for multiple pods at once, or refill containers that automatically top up the pod.

Most prefilled systems use MTL-style coils (0.6-0.8ohm) optimised for nicotine salt e-liquids. Popular prefilled pod options offer the same flavours you'd find in bottled e-liquids, but without any filling or mess.

Which Coils Work Best with Different E-Liquid Types?

High-VG E-Liquids: For BIG Clouds

High-VG e-liquids (70VG/30PG and above) are thicker. They need coils designed to handle viscous liquids effectively:

Lower resistance coils (typically sub-ohm) with larger wicking ports work best. Higher wattage capability properly vaporises thicker e-liquid. Enhanced airflow designs support the increased vapour production.

50/50 E-Liquids: The Versatile Choice

Balanced VG/PG ratios work with a wide range of coil types. Mid-range resistance coils (0.4-1.2ohm) offer excellent versatility. They're compatible with both MTL and RDL setups depending on resistance choice, and moderate wattage requirements make them suitable for most devices.

Nicotine Salt E-Liquids: MTL Specialists

Nicotine salts work best with specific coil characteristics:

Higher resistance coils (0.8-1.4ohm) for MTL vaping. Lower wattage operation (10-15W) prevents harshness. Tighter airflow design delivers the familiar draw resistance that MTL vapers often prefer.

What About Beginner vs Advanced Setups?

New to vaping? Start with higher resistance coils (1.0ohm+) in simple pod systems. They're forgiving, work at lower wattages, and pair perfectly with nicotine salts or 50/50 e-liquids.
Experienced vaper? You can handle sub-ohm territory. Lower resistance coils offer more customisation options, work with high-VG liquids, and provide the flexibility to fine-tune your experience.

How Do I Get the Most from My Coils?

Prime Properly Every Time

Even the best coils will disappoint without proper preparation:

Pre-saturate the cotton by applying a few drops of e-liquid directly to visible wicking material
Fill your tank and wait 5-10 minutes for complete saturation
Start at lower wattage and gradually increase to find the sweet spot
Take a few draws without firing to help distribute e-liquid

Find Your Wattage Sweet Spot

Operating within the manufacturer's recommended wattage range is crucial. Too low? Insufficient vapourisation leads to muted flavours. Too high? Overheating causes burnt notes and kills coils prematurely. The optimal range is usually in the middle of the recommended span for best flavour balance.

Simple Maintenance Wins

Regular maintenance preserves flavour quality. Monitor e-liquid levels to prevent dry hits. Clean connections between coil and device. Replace coils when flavour becomes muted or burnt notes appear.

When Should I Replace My Coil?

Recognising declining performance helps maintain optimal flavour:

Performance red flags:

Muted flavour compared to a fresh coil
Burnt or off-tastes that don't match your e-liquid
Reduced vapour production at the same settings
Gurgling or flooding indicating wicking problem

Typical lifespan: Most coils last 5-10 days. Usage frequency, e-liquid type, wattage settings, and maintenance quality all affect longevity.

Not sure where to start? Try our Coil Finder Tool to match your device to the correct coil in seconds.

Conclusion

Getting excellent flavour from your setup comes down to choosing vape coils with the right specifications for your style. MTL vapers need higher-resistance options for lower wattages. DTL users benefit from sub-ohm coils that handle higher power levels.

The fundamentals stay the same: proper priming, correct wattage, and timely replacement.

Ready to upgrade your flavour game? Explore our complete coil collection and tank systems to find your perfect match. Need guidance? Our Customer Services Team knows these products inside out and can help you select the right coils for your device.

Shop Vape Coils

Best Vape Coils for Flavour: Top Picks for 2025

Key Takeaways